SOLD: Marshall - JVM205H 50W AMP HEAD - MINT CONDITION AMPLIFIER

Discussion in 'Member Classifieds' started by MarshallGuySC, Sep 19, 2020.

  1. MarshallGuySC

    MarshallGuySC Active Member

    Joined:
    Jun 22, 2019
    Messages:
    75
    Likes Received:
    130
    For sale is my 100% mint condition 50w Marshall JVM 205H head. This has been used sparingly in my home studio. It has never left the house & never gigged. Not a scratch, scrape, ding, rip or scuff. It will come in the original shipping box. It will also come with the programmable 4-button footswitch. You can use it to program channels or features, or both...into any of the 4 buttons. VERY handy feature. (ex. If you want the 1st button to be the clean channel with reverb and the 2nd button to be the 1st gain channel without reverb, etc...endless possibilities). It also has a 2nd master volume, which you can also program into any of the buttons, etc...

    MADE IN ENGLAND, like any good Marshall should be!

    **SOLD**

    Some specs & features:
    In a nutshell, the Marshall all-valve, 2-channel JVM205H 50W tube head is a 2-channel, 50W version of the most versatile Marshall amplifier ever made, the JVM410H. Both channels are completely independent of each other and they boast 3 Modes, all 6 of which are footswitchable and feature their own unique gain structure. It effectively makes the JVM205H 6 Marshalls in one!

    The JVM205H has studio-quality digital reverb with a level control for each channel. This is also footswitchable, as are the amp's two Master Volume controls and the Series/Parallel effects loop. Resonance and Presence are also equipped with master controls.

    With its ingenious footswitch (UK patent pending) and the fact all the amp's switching (channel/modes, Reverb, Master Volume selection, FX loop) can be done via MIDI, you're looking at an incredibly flexible amp! The 4-way footswitch boasts LEDs and memory, plus it connects to the amp via a regular guitar cable.

    From the cleanest clean to the filthiest distortion ever found in a Marshall and all points in-between, the JVM205H all-valve amp head will give you whatever tone you need right when you need it.

    FEATURES
    50W power
    All-valve, with 5 x 12AX7s and 2 x EL34s
    2 totally independent, footswitchable channels
    Each channel has 3 footswitchable modes
    Footswitchable, studio-quality digital reverb
    Independent reverb controls for each channel
    2 footswitchable master volumes
    2 FX loops, one series, and one parallel
    Parallel FX loop is footswitchable on/off
    Speaker emulated XLR output
    4-way footswitch (with memory) supplied
    All switching can be done via MIDI
    Made in England

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
    Last edited: Sep 21, 2020

Share This Page