Hiwatt, JTM45/100 and Vox AC30 Chassis

Discussion in 'Member Classifieds' started by StuC, Nov 25, 2020.

  1. StuC

    StuC Member

    Joined:
    Feb 12, 2014
    Messages:
    53
    Likes Received:
    65
    Have a few chassis available:

    JTM45/100 blank chassis. 2mm aluminium with welded seams for extra strength. 3/8" square holes in flanges for cage nuts, otherwise blank. £40 + shipping.

    Vox AC30/4 or A30/6 non top boost. 1.6mm steel power amp chassis with yellow zinc passivation, 1.6mm alumnium preamp chassis. Dimensions, hole placement etc. directly copied from a '64 AC30, but PT cutout and bolt pattern modified to accept modern replacements as well as original. £70 + shipping.

    [​IMG]

    [​IMG]

    [​IMG]
     
    Last edited: Nov 26, 2020
    neikeel likes this.
  2. neikeel

    neikeel Well-Known Member

    Joined:
    Feb 12, 2014
    Messages:
    5,165
    Likes Received:
    3,640
    Did you sell the big chassis?
    If not I am interested!
     
  3. StuC

    StuC Member

    Joined:
    Feb 12, 2014
    Messages:
    53
    Likes Received:
    65
    I have a few - shoot me an email :)
     
  4. StuC

    StuC Member

    Joined:
    Feb 12, 2014
    Messages:
    53
    Likes Received:
    65
    Also have a few Hiwatt style chassis, patterned off an original Hylight Hiwatt. Rear of chassis is punched for IEC mains plug and has 30mm holes for modern Schurter voltage and impedance selectors. £75 + shipping.

    [​IMG]

    [​IMG]
     

Share This Page