Separate names with a comma.
You could lower the cold clipper to 5k6, some people go lower, but I wouldn't personally. Easily reversible also. This still leaves plenty of room...
20171206_192853_1512606674747 by dslman posted Dec 6, 2017 at 7:33 PM A visual ,but may need to get a ground plug adaptor for one of the amps....
I have the DSL100H to compliment my 2204. The 100H is a high gainer, but is very full, and tight with a decent OD pedal pushing it. Trick is to...
I’ve heard the term , but refresh me. Its more the amp/chassis package that I think is not seen often.
Right on , I tend to think they were original as well, but am inclined to believe they are a rare bird. Same amp , of coarse , but a rare...
Yes, that’s what I’m thinking also. Thanks for replying.
Yes I understand that. However the headshell I’m referring to as the JMP, is slightly different than the typical Plexi shell, and it also has...
I do see pics of the plastic switches 4-hole amps in the JMP shell, but almost none with the metal switches. I am thinking it may be a very rare...
If you look closely at the JMP shell , the center line on the face is lower than the traditional Plexi shell, also the opening for the controls...
From what I understand the JTM was changed to the JMP in 1968. I don’t see hardly any 4-hole Plexi’s in the actual JMP shell though. Especially...
Time does fly man... we're thinking of doing some originals with the old late 80's metal/rock band we had long ago.. There's three out of four of...
The Hellatone 30's are neither dull or boxy IMO.
Perfect tone zachman! I know this is a old thread, but I picked up a Avatar Traditional 4x12 with the Hellatone 30’s . It’s really impressing me....
In the slant I have G12T-75's , and Greenies in the bottom cab.
20161010_164033_1476135608790 by dslman posted Oct 10, 2016 at 5:47 PM20170429_145528_1493492285981 by dslman posted Apr 29, 2017 at 3:00 PM
Cool thread! I picked up a third 4x12 today . It's a Avatar Traditional, but man is that thing built solid. I've got to get casters on it...
bump. selector switch already in schematic.
I was thinking of swapping the red/white wires on the single coil. Everything works, but the resistance seems low on 2/4. I'm only getting 3-4k...
This is pretty much it, The Red is hot on the single coil , White is hot on the N/B. [ATTACH]
Let me see if I can find it
