Separate names with a comma.
far as i know they're quite similar. never had one or bothered to look at a schematic but these old traynors are fantastic
this seems like a solution searching for a problem
if you have issues with "overdrive swirl" from the phase inverter, look into the "paulc mod" that's often done to the cathodyne in fender...
there are so many fantastic fv-1 based reverb pedals these days that if you're not using a spring reverb (which really i could give or take...
it seems like you've already done half to work disconnecting them to test so why the hell not? the way i view it is like auto maintenance: I'd...
hey if it sounds good to you then go for it
painting with a broad brush here but: lower capacitance early on can result in more supply ripple but could potentially result in more a more...
incorrect voltages (because you're removing a dropping resistor), possible oscillation (from running so many stages off the same node. best...
yes each 50uf section is identical and each 20uf be section is identical sure, you can replace a 3 section can with a 2 section can, but then...
3 section cap has 4 terminals. one for each section plus a common terminal
what's the side say? there should be a key. most likely I is common. i would assume this to be a 3-section cap
get this on a scope with a test signal. you're looking at less than a hundred bucks on ebay. an electric guitar is great for tone testing a...
the side of the old can cap should have either a key (maybe with symbols) or at least mention what the sections are
yeah that sounds hokey
big old cathode bypass cap on the cold clipper if that's r6. pretty dumb, kinda lose the whole 2204 vibe with it in
i don't really mess around much with master volumes because if i want less output at full bore, i just use another amp lol i have used trainwreck...
pt should be a laydown model so any way the choke is mounted will be 90 degrees off
ahhhh gotcha i just mentioned the 12au7 because it's a similar tube to the 6cg7. in a cathodyne itself you're not getting much gain regardless of...
use a 12au7, be mindful of the pinout differences I'm guessing it's a long tail pair, you can pop in values here:...
what does the side of the cap say? how many sections?
