Separate names with a comma.
v1 A is the gain stage check that circuit . Shielded signal cable is grounded is the grid stopper removed . Is sounds like some gain mods where done
The main difference between the 2204 and 2203 is the number of output tubes . The power is split between two banks of tubes one has one the ether...
A few years ago I built a SLO clone . It sounded like a cross between a wood chipper and a drum machine . What I learned years later is just how...
I feel your pain I can help send me those pedals for a good safe home
To build a SLO 50 clone . Now on to the SLO 100 With all the good stuff
The punch you seek is in the circuit not the transformer .
Do your self a favor if this is your first amp build a fender champ the things you will learn will help you build a bigger amp .
I stand corrected
Good job it would be nice to have some good info on speaker and cab design
If the gasket is stuck on the frame a razor blade can be worked between the two. If you can get it in thar take your time
I build high gain amps i have a 2204 and SLO 50 started to build a SLO 100 . A JTM 100 is in the works to . I still have to put a pedal board...
If you take a AC sine wave only the upper part it looks like a bunch of bumps in the road now you put a power supply in thar when the wave drops...
Greetings from across the pond
It was replaced at one time . Some solder junky just Thur what ever part in thar . If the bias works leave it you can over filter the DC if you...
Yes you can connect to the filters at different locations for that circuit . You might get a ground loop
I don’t think the filter cap size matters . It is the DC reference you want for the power tubes heaters . A lot of the SLO clones have this
Greetings . I looked at the schematic the reverb is powered be op amps . Not a easy fix you can check for power open resisters is a good start .
Anything that goes up in value will be in demand . Just make sure that you get the right guitar if that is what you are after
You also need a bias probe to go between the socket and tube . Take some time and do some research . This tube stuff is not easy the more time you...
Don’t forget to test the power supple . You don’t want to power up on 110 volts for the first time . Find a 6volt AC power supply a step down...
