Separate names with a comma.
Try to lower the bias point increase the ground resister . Do you have a grid stopper
Check the bias . Take it back
That ticking sound is called box cars . I think you have to much gain . Do you have a pot for the input
Having confidence in your self is 90 percent of the game the ten percent you can fake .
No two tubes are the same . So if you change the tubes and sounds a little bit different is it really better or just different . The thing that...
You need to know what sound you are looking for
Changing tubes will not do much for the sound . The amp is voiced a certain way . You have to get the right speaker cab to go along with The...
Greetings from cal . Put some good tubes in the preamp if no sound send it to the tech . It may have other stuff that need to be looked at
It looks like the trim pot is bad . You can take voltage readings from pin 5 to center tap always . And trace back to the power source to find the...
Just love that Art Deco look on that guitar
So what does the rest of the house have
What is the bias voltage.
Just because you build you own guitars and amps. Doesn’t mean you can play them . That’s my story
You have a shorted grids In the tubes if it is pulling that many amps . It is not the amp
You should match both transformers together . I just built a soldano 50 clone with a 40 watt band master set made for 6l6 same plate voltage as...
Lets ad to the confusion. The most important tubes Are the power tubes the bias most be set right for it to sound right . The preamp tubes do two...
The speakers are power limiters for the power tubes . Check the bias
I’m not saying don’t get them and you can’t remove them . In some places it might not fit in
Do mean c1 on the hum balance . I don’t see q1 . C 1 is a tone cap that roll off some frequency to ground
Some day you are going to have to sit at a large table at a job interview and some manager is going to look at those holes in your head and think...