Separate names with a comma.
Don’t simply assume a jiggly pre amp valve has a poor connection between valve pins and valve base contacts, the contacts are usually slightly...
You said in your earlier post that 100 watt amps have SL/A or SB/A (representing Super Lead and Super Bass respectively) and 50 watt models had SL...
That’s not correct for the 50 watt amps - they had no model designation in the serial number prefix.
The curved lip, yes that is a 1969 onwards thing, mid 1969 specifically. I’ve seen both plexi panel amps with a round lip and metal panels with...
I’ve found grey rubber examples, and hard black plastic ones, that are exactly the right size, but never come across the grey hard plastic ones...
No, it doesn’t - the A suffix screen printed after the SB/, SL/ etc has nothing to do with manufacture date. The 1969/1970 A lettering appears...
The amp will have the usual multi primary mains transformer, but instead of the plug in selector, there should be a set of connections spread out...
Are you sure that’s a 100w transformer to start with? the Dagnall 100w power transformer could not be fitted in place of a Drake 50 without...
The 18w combo I had for a while had those glides on the bottom.
There’s no such thing as a 100w Organ version. The 50w standard range always had an organ variant until about 1973/4. It was the same as a bass...
Exactly - just match the impedance and be done with it. anyone that says it’s fine to set the amp lower than the speaker load , or vice versa,...
It’s a fairly easy two handed lift! I can’t do all the other requests though - the amp is in storage and inaccessible right now, but inside is...
It’s a Dagnall.
If it’s a Lead & Bass 50w then the UK models also came with a captive mains lead.
No - it’s in storage and I can’t get to it unfortunately!
