Recent content by markok1847

  1. M

    Marshall DSL20HR and 1936V cabinet - modern metal sound?

    Yes, I ordered the DSL1 couple of days later than the DSL20, both arrived within a week or so (mostly sat in the German airport somewhere). Its crazy that DSL1 costs the same as one boutique pedal. I started the replacement process for the 1936V cabinet and the DSL20. Im also thinking about...
  2. M

    Marshall DSL20HR and 1936V cabinet - modern metal sound?

    So I went ahead and also purchased the DSL1HR (received it today) and with the same cabinet and power outlet it doesnt have the hiss. It gets to the same level hiss wise only if everything is on max.
  3. M

    Marshall DSL20HR and 1936V cabinet - modern metal sound?

    I think the hiss is definitely too loud, when dials are at zero it basically sounds indeed like everything is at max volume. Actual noise gate in the FX loop didnt help either, it mutes the additional guitar noise but not the actual hiss. I dont have any new tubes at hand right now, I see that...
  4. M

    Marshall DSL20HR and 1936V cabinet - modern metal sound?

    Here is a video of the hissing: I see that there are long threads about the hiss. Am I also the unlucky one?
  5. M

    Marshall DSL20HR and 1936V cabinet - modern metal sound?

    Amp and cabinet finally arrived yay. You guys are right - getting the right tone takes a while :) I have a small problem though - is this amp supposed to produce a small hiss at all times? I even have the hiss when nothing is not plugged in and when Im at full or half power. Noisegate doesnt...
  6. M

    Marshall DSL20HR and 1936V cabinet - modern metal sound?

    Thank you! Im literally going to print this out for future reference :)
  7. M

    Marshall DSL20HR and 1936V cabinet - modern metal sound?

    Ah, interesting. Do you mean that the additional resistor (spelling?) is actually inside the head between the preamp and poweramp? Or can it be added after the head output jack also? I assume these are all self-made and cannot be purchased.
  8. M

    Marshall DSL20HR and 1936V cabinet - modern metal sound?

    Yes, I searched for some additional info and you are right - from the head (8ohm) to the cabinet (mono 8 ohm) :) What I find odd though is that if for example I have ordered the DSL1HR instead which only has one 16 ohm out, I couldnt have contacted it to the 1936V cabinet with both speakers...
  9. M

    Marshall DSL20HR and 1936V cabinet - modern metal sound?

    I will definitely look into that LS-2 pedal thing. First I thought the pedalboard thing is easy but now understand that it can get very complicated.
  10. M

    Marshall DSL20HR and 1936V cabinet - modern metal sound?

    Thank you for the replies so far. Still waiting for the DSL20HR amp and the 1936V speaker :) I just realized I dont know how to wire these two together. Do I need one speaker cable or two?
  11. M

    Marshall DSL20HR and 1936V cabinet - modern metal sound?

    I will definitely look into the SD-1 thing and will let you know about the Revv pedals. With YouTube comparisons at least with the Revvs people say that they sound very different but on the videos they sound almost exactly the same, so that will be interesting. Should I also get a delay pedal...
  12. M

    Marshall DSL20HR and 1936V cabinet - modern metal sound?

    Thanks. Im just learning the pedals thing since 20 years ago as a teenager I had no money for a decent amp and pedals. I forgot to mention that I also bought a Boss NS-2 for the noise and a TC Electronic Looper pedal. I actually have no idea how I will set this all up when the amp and cabinet...
  13. M

    Marshall DSL20HR and 1936V cabinet - modern metal sound?

    My second post already in this forum :) So, I finally managed to get back into guitar playing after 20 years (first I was 16) and I managed to order MG50GFX combo which is indeed some pretty bad sounding combo - I mainly play the clean channel, also added a Polara reverb pedal for some fun. The...
  14. M

    MG50GFX speaker replacement problem (opening the amp and ohm problem)

    Thank you for the replies :) I will measure the ohms with my voltmeter when I finally manage to open this :) I think its supposed to be some no-name brand in there. This combo is just for playing some clean stuff with pedals and I can carry it around in my house, its also entry enough for my kids.
  15. M

    MG50GFX speaker replacement problem (opening the amp and ohm problem)

    Ah, I think I posted this in the wrong forum section, sorry about that :)

Latest posts



Top