8008 power amp

BadMrScary · 03-14-2008, 09:46 PM

Does anyone know where I can get the 810k pots for these things?

Thanks,
cheers

timstoel · 03-17-2008, 12:54 PM

You could probably get away with a 1M pot with no problems. Tolerance on pots is usually 10-20%. If it is a 20%, your 810M pot could be anywhere from 648k to 972k. If it is a volume or gain control pot, it would make pretty much no difference at all if you used a 1M, if it were a tremolo circuit, for example, it would increase the range of speed or intensity.

Tim

03-14-2008, 09:46 PM	#1 (permalink)
BadMrScary Junior Member Join Date: Mar 2008 Posts: 1	8008 power amp Does anyone know where I can get the 810k pots for these things? Thanks, cheers

03-17-2008, 12:54 PM	#2 (permalink)
timstoel Member Join Date: Jan 2008 Posts: 62	Re: 8008 power amp You could probably get away with a 1M pot with no problems. Tolerance on pots is usually 10-20%. If it is a 20%, your 810M pot could be anywhere from 648k to 972k. If it is a volume or gain control pot, it would make pretty much no difference at all if you used a 1M, if it were a tremolo circuit, for example, it would increase the range of speed or intensity. Tim __________________ http://www.newoldsounds.com - rare NOS capacitors, tubes, speakers and more

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode