valvestate 232 reverb trouble shoot

jagger241 · 09-07-2009, 02:49 PM

reverb doesnt seem to be working when i unplug a rca jack to reverb i get a loud noise how do i trouble shoot

thrawn86 · 09-07-2009, 03:54 PM

Make sure all the RCA's are firmly plugged in to start. If there's still nothing, you may need to take the reverb tank off and see if the springs are off the guides, or if any connections with the RCA wires is touching the tank.

javier pintos · 09-07-2009, 03:55 PM

hi again

i sort of meant you to read the other thrads that already talk about the same topic Jagg

you´ll find quite some helpful comments

good luck

rockinr0ll · 09-07-2009, 05:46 PM

I don't get that on my AVT model but yours is older. I'm sure if you unstall it or cut the plugs it may stop?

09-07-2009, 02:49 PM	#1 (permalink)
jagger241 Junior Member Join Date: Sep 2009 Posts: 2	valvestate 232 reverb trouble shoot reverb doesnt seem to be working when i unplug a rca jack to reverb i get a loud noise how do i trouble shoot

09-07-2009, 03:54 PM	#2 (permalink)
thrawn86 Senior Member Join Date: Aug 2009 Location: Far Nor Cal USA Posts: 426	Re: valvestate 232 reverb trouble shoot Make sure all the RCA's are firmly plugged in to start. If there's still nothing, you may need to take the reverb tank off and see if the springs are off the guides, or if any connections with the RCA wires is touching the tank. __________________ Drivin' faster in my car... 02 DSL 401-Ei's 02 1960b 02 Gibson LP Studio Silver 03 PRS Santana SE Holy Grail reverb Originally Posted by J. Robert Oppenheimer "We knew the world would not be the same."

09-07-2009, 03:55 PM	#3 (permalink)
javier pintos Senior Member Join Date: Sep 2008 Location: Mexico Posts: 323	Re: valvestate 232 reverb trouble shoot hi again i sort of meant you to read the other thrads that already talk about the same topic Jagg you´ll find quite some helpful comments good luck

09-07-2009, 05:46 PM	#4 (permalink)
rockinr0ll Senior Member Join Date: Feb 2009 Posts: 1,340	Re: valvestate 232 reverb trouble shoot I don't get that on my AVT model but yours is older. I'm sure if you unstall it or cut the plugs it may stop?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode