b00mstick11

New DSL100 reverb won't work. Tried switching on with footswitch. Nothing. Took back off and cable and connections are intact.Bought it out of town so hard to return it. Any ideas??? Thanks....

mystic fred

i have known reverb units to die, though before you order a new one try testing it with the reverb unit from another amp that you know is ok, they are fairly easy to remove and connect up. Try testing the current with a meter, or changing the RCA cable as sometimes this can be pinched and broken while removing or replacing the chassis.

Bassmec

Perhaps it just has the red and black rca cables reversed, try swopping the cables around on the reverb tank it wont do any harm to try it.

comradejay

I have the same problem and no solution yet.

__________________
Marshall JCM 2000 DSL
Marshall Cabs 1960A
Gibson LP Studio
Fender Jagstang
Fender Telecaster
Fender Stratocaster
Ibanez Roadstar II

solarburnDSL50

Now I'm just making sure but you did adjust reverb knobs on the front of the amp right?

Did you unplug the foot switch jack and adjust from the front only just in case the jack in back is causing problems?

Ok thats enough stupid out of me.

__________________
DSL50 - FJA modded
Loaded with a Martimus Maximus Preamp Tube Stack
Power tubes 6CA7EH's

Strat HSS & Tele HH

Avatar 412 loaded with Greenbacks

Vox Night Train
RFT 84's
JP 12AX7WA & RFT ECC83

javier pintos

i remember i checked a friends rever unit with a multimeter, don´t really recall how, but i did not get continuity on one end, then i installed his rever on my combo and it did not work, installed my combo´s reverb on his head and it worked, so he ordered a reverb, if i recall correctly they are like 25USD at tube depot

http://www.tubedepot.com/reverb.html

http://www.tubesandmore.com/

http://www.accutronicsreverb.com/