TSL100 Down to 50

guitaryellow · 11-13-2008, 11:32 AM

Hi

Is it possible to drop my 100 down to 50watt, is there a mod etc.
I've heard I can take the 2 outer tubes out and use the 8 ohm output.
Is this correct or a definite no no?
Regards Ade.

RiverRatt · 11-15-2008, 11:57 AM

Depends on your cab. If your cab is rated at 16, set your amp at 8, or if the cab is 8, set your amp at 4. Don't expect a dramatic change in volume, though.

PaoloJM · 11-15-2008, 04:57 PM

Quote:

Originally Posted by RiverRatt

Depends on your cab. If your cab is rated at 16, set your amp at 8, or if the cab is 8, set your amp at 4. Don't expect a dramatic change in volume, though.

+1, If it is volume reduction that you are after I would say that attenuator will give you much better results. Ultimate Attenuator and THD Holtplate are both good and I've heard that the Weber is also good.

11-13-2008, 11:32 AM	#1 (permalink)
guitaryellow Junior Member Join Date: Oct 2008 Location: Kent, by the tunnel Posts: 28	TSL100 Down to 50 Hi Is it possible to drop my 100 down to 50watt, is there a mod etc. I've heard I can take the 2 outer tubes out and use the 8 ohm output. Is this correct or a definite no no? Regards Ade.

11-15-2008, 11:57 AM	#2 (permalink)
RiverRatt Senior Member Join Date: May 2008 Location: Between Memphis and Nashville Posts: 517	Re: TSL100 Down to 50 Depends on your cab. If your cab is rated at 16, set your amp at 8, or if the cab is 8, set your amp at 4. Don't expect a dramatic change in volume, though.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode