Go Back > The Amps > Marshall Amps
LIKE MarshallForum on Facebook FOLLOW MarshallForum on Twitter
Thread Tools Display Modes
Old 03-22-2009, 11:56 PM   #1
V.I.P. Member
MartyStrat54's Avatar
Join Date: Feb 2009
Location: Licksville
Posts: 26,136
Send a message via Yahoo to MartyStrat54
Exclamation Need Bias Values For A JTM60!!! EL34's!!!

Hello: Marty here. I'm trying to help out cudamax2343. He's got a JTM60 head and he is wanting to bias a set of tubes in the head. Is the bias the same as other 600 series heads? My TSL602 is biased at 80mV (40mV each tube).

Does any of you other techs know what the bias value is for this amp? I can't find it anywhere. Not even on Dr. Tube.

Also, it appears that unlike my TSL 602, there is only one neutral test point and one hot test point, instead of a hot-neutral-hot found on my 602. Is that correct? I've never worked on a JTM60 head and I am just trying to get cuda going down the road...safely. I don't want him burning any tubes.

Help us if you can.

MartyStrat54 is offline   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 05:38 AM.

Find us on Facebook!   Follow us on Twitter!

Our Network: PRS Guitar Forum | Luthier Forum | SG Guitar Forum | Les Paul Forum | Music Gear Forum | 7 String Guitar Forum | Acoustic Guitar Forum

MarshallForum proudly supports St. Jude Children's Research Hospital

Copyright © 2005-2016, All Rights Reserved.