Separate names with a comma.
yup. didn't do a lot of empirical testing for the values: wanted to be able to get lower than the Marshall 10k and higher than the soldano 39k....
just finished a build with a 6k8 resistor in series with ~40k pot in a jcm800-based preamp. love it!
you sure you haven't rotated the switch 90 degrees and are connecting the wrong contacts when switched? i always use the continuity feature on my...
if only some handsome, brilliant fellow would've come along earlier with that suggestion
cathode bias generally produces lower output power than the same setup were it using fixed bias, no?
he already mentioned about 7 years old
repaired a gcb95q that had a broken inductor and heavily modified my vox v847 (1h inductor, sweep cap more suitable for bass, true bypass, added...
d1 is for the bias i presume?
class a it's a great marketing gimmick
what's the primary impedance of the 280w transformer? go big or go home lol
if you're not trying to buy a specific pedal this thread is probably better suited for the tone zone? might get more replies
once you've swapped out the applicable iron to turn this into a kt88 you might as well build a stock super lead with your spares
or fabricate a...
there's a reason why the slang name for directly mains connected amps is "widowmaker"
yup you'll have a whole pole left free. an embarrassment of riches!
i have the reverb tank and the reverb board from my 98 dsl100 up on reverb if that be the case
okay so you're moving the switch to the treadle. VERY important detail that was left out
yes dpdt normally open momentary switch
be mindful of...
nice! literally clear as mud!
so are there really only 4 wires on the switch? if so dpdt should work
still seems like a weird mod. maybe you get...
i like v1 so i can run the resistor directly from the jack to the pin on the socket
one of the Baldwin organ transformers i just picked up had a separate heater tap for the power tubes. also i can only imagine how much filament...