Separate names with a comma.
I have a late series [more gain] JMP 1987 clone with an PPIMV added to it and it crunches up well. Russ
Had - The 8s & 10s were from my chasing good sound at low volumes quest that included tube amps down to 4 watts, SS, hydrids and modelers. That...
You just gotta get in the right frame of mind [WARNING WARNING WARNING - DON'T READ FURTHER IF YOU ARE SUSCEPTIBLE TO DANGEROUS THINKING!!!] just...
+1!! The only reason I use finger joints is for the look on bare wood. With today's glues like the Titebond series increasing surface area for...
Welcome to the forum and great post! Russ
I like the red - with a matching pair of 1960's it would be titanic! I have a pair of 2203's 77 [el34] & 78 [6550] and I like them both since...
Back sanded and lacquered. Now I'm contemplating a clip system so I don't have to have exposed screw heads holding the back panel on. [img]...
Yes, I ran into Adam of Satellite at the one and only Dallas Amp show in 2014. His take or nod toward the JTM45. Uber touch sensitive and lush...
No woodworker said 'I have enough clamps' EVER. Test fit of the back panel - I originally planned to cut the corner of the 'swoosh' out but I...
You just don't know what is between the outer shells and there are different grades of BB too. Grade B/BB top sheet no patches / bottom sheet...
Better pics. [img] [img] Stringbox cuts [img] Glued [img] [img] Tomorrow evening will be drum sanding then finish sanding. I hope I don't...
I'm in refinish mode having found a good spray lacquer. It's a very dark African mahogany with zebrawood trim that I oiled. [img] [img] I...
I'm told zip tying shopping carts to car door handles is highly amusing... Russ
12" seems to be the depth for closed back depending on volume. I've never messed with mdf baffles or backs always been a 3/4" BB ply guy. It's...
Nice job on bending the aluminum straight! I can't tell if the rubber bit is a grommet or a washer but I recommend a grommet to keep the cord...
I'm interested in what you find. I've only built one open back cab for a guitar show - it's a crazy ass 1987 combo - 9" deep and it sounds...
4x12's are my preferred home cab for any amp. V30's are great with the Jube 2555 - first time I really liked V30's. I can't imagine it being any...
Except for a few glancing 'natives' remarks nobody has mentioned properly enticed [in my case deluded or with daddy issues] GROUPIES [you know...
Thanks for the JPish snack! Russ
This will probably continue for a week or so after I'm dead for me - gotta give the delivery services time to get those last orders delivered. Russ
