Separate names with a comma.
... and make us trouble :(
You and I must be the fewest ones who hear difference between UK and China and prefer UK
Brian Baker used to have some...
I own JMP 2203 and 2x12 cab in a living room. Just because I have no other amp and this is my gig amp, too. Great headroom at low volumes makes I...
Yes, you may! Sorry for the delay, I just don't hang around here so often.
W = 600 mm
H = 240 mm
D = 233 mm
I built cab over the 5010 chassis so...
Recently I had 1987x, 50w JMP RI.
Nothing beats a real thing, not even OD pedal or PPIMV in my case.
So I sold it, it was never that good to keep...
Tenk ju pipl, hvala ljudi! :-)
The thing is all this not so hard work was cos I was chasing black Gibson Les Paul Custom Norlin and wanted to sell...
More crappy mobile pictures. But my hands get dirty all the time working so I can not use proper DSLR camera. Hope I will take some nice photos...
The same pinewood which I used for the cab. Now for the front panel. Drilled & sprayed.
Alu grid bought at the tuning & styling car shop. Cut &...
Darkness increases with volume pot
Some say "The end is near!"
Black spray inside.
Tolex is measured and cut. Luckily this JCM/JMP model has plastic corners which cover all...
Assembling plates ends well, next thing is put this baby in a shell
[ATTACH] [ATTACH] [ATTACH] [ATTACH]
Face & back plate came last night. Below is just a teaser. Bigger pics after assembling.
Scratches on the face plate are battle marks.
Next stop: printing shop
Then I took wide thin metal blade and put between the plate and the chassis. It came off nicely.
Off course a bit: I've got an idea. Since I am building JCM cab not plexi, thought it would be better using this metal face plate. Called at the...
Wait. Before we talk about clipping and pushing preamp tubes, what do we know about distortion? And do we hear the difference between SS and tube...
I think there are two categories of players:
1. Only room players
2. Mixed room and gig ones
So there should be two types of answers. I am in the...
Next: since "printing test" directly to the chassis turned out well, engraver got plexi for laser cutting. A software I am using for engraver's...