Marshall JCM 900 4500 and 1960A 4x12 Cab

Rhys · 08-19-2009, 04:12 AM

Model 4500. 1997 50 Watt Hi-Gain Dual Reverb head.
With two channels ... A and B. A gives cleaner sounds, but allows some crunch. B is a lead channel for hot gain sounds.
Channel volumes, reverb, and gain per channel
FX Loop
Hi/Low switch

Also got a 4x12 1960A angled cab. Cab is in good condition except there is a blown speaker and 3 holes in the grill.

Based just outside Cardiff so cab would have to be picked up but head can be posted.

thanks

Rhys · 08-24-2009, 05:12 AM

Will trade for a Vox AC30

Jesstaa · 08-24-2009, 05:36 AM

Seeing as a blown speaker would change the impedance of the cab, have you checked it? You could be doing damage to the output transformers/tubes in the head. You'd wanna make sure that's all good before selling it.

Rhys · 08-25-2009, 03:20 AM

I've been using a different cab with the head. Just had this one lying around so I felt it's time to sell it

.

Jesstaa · 08-25-2009, 03:53 AM

Alright then, just thought I might check for the buyers benefit. Good luck mate.

American Viking · 08-25-2009, 04:11 AM

Quote:

Originally Posted by Jesstaa

Seeing as a blown speaker would change the impedance of the cab, have you checked it? You could be doing damage to the output transformers/tubes in the head. You'd wanna make sure that's all good before selling it.

Good lookin' out.

Jesstaa · 08-25-2009, 05:18 AM

Quote:

Originally Posted by American Viking

Good lookin' out.

Just making sure I'm doing my part

08-19-2009, 04:12 AM	#1 (permalink)
Rhys Junior Member Join Date: Aug 2009 Posts: 3	Marshall JCM 900 4500 and 1960A 4x12 Cab Model 4500. 1997 50 Watt Hi-Gain Dual Reverb head. With two channels ... A and B. A gives cleaner sounds, but allows some crunch. B is a lead channel for hot gain sounds. Channel volumes, reverb, and gain per channel FX Loop Hi/Low switch Also got a 4x12 1960A angled cab. Cab is in good condition except there is a blown speaker and 3 holes in the grill. Based just outside Cardiff so cab would have to be picked up but head can be posted. thanks

08-24-2009, 05:12 AM	#2 (permalink)
Rhys Junior Member Join Date: Aug 2009 Posts: 3	Re: Marshall JCM 900 4500 and 1960A 4x12 Cab Will trade for a Vox AC30

08-24-2009, 05:36 AM	#3 (permalink)
Jesstaa Senior Member Join Date: Apr 2009 Location: Gippsland, Vic, Australia. Posts: 1,063	Re: Marshall JCM 900 4500 and 1960A 4x12 Cab Seeing as a blown speaker would change the impedance of the cab, have you checked it? You could be doing damage to the output transformers/tubes in the head. You'd wanna make sure that's all good before selling it. __________________ GEAR LIST Marshall JCM900 4100 (6L6) (1995) Marshall Valvestate 1965A cab (????) Cort VX-2V (2008) H&S 7 String (Years are over rated) TUBES/SPEAKERS Power: Groove Tube 6L6GCB Phase Inverter: Chinese 12AX7A Pre: V1 - N.O.S Mullard ECC83. V2 Chinese 12AX7A Speakers: Celestion G10L-35 Marshall forever My tube amp & Real Music appreciation forum

08-25-2009, 03:20 AM	#4 (permalink)
Rhys Junior Member Join Date: Aug 2009 Posts: 3	Re: Marshall JCM 900 4500 and 1960A 4x12 Cab I've been using a different cab with the head. Just had this one lying around so I felt it's time to sell it .

08-25-2009, 03:53 AM	#5 (permalink)
Jesstaa Senior Member Join Date: Apr 2009 Location: Gippsland, Vic, Australia. Posts: 1,063	Re: Marshall JCM 900 4500 and 1960A 4x12 Cab Alright then, just thought I might check for the buyers benefit. Good luck mate. __________________ GEAR LIST Marshall JCM900 4100 (6L6) (1995) Marshall Valvestate 1965A cab (????) Cort VX-2V (2008) H&S 7 String (Years are over rated) TUBES/SPEAKERS Power: Groove Tube 6L6GCB Phase Inverter: Chinese 12AX7A Pre: V1 - N.O.S Mullard ECC83. V2 Chinese 12AX7A Speakers: Celestion G10L-35 Marshall forever My tube amp & Real Music appreciation forum

Today
Marshall Amps	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Marshall Amp Forum

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode