1936 avt150h question

eshy · 07-25-2009, 06:06 AM

Hi i have the above set up now and was wonderinghow to cable these up ?
Should I run a single feed from head to cab into the 8 ohm input, or should I run 2 feeds from the head into the 16 ohm inputs?

poeman33 · 07-25-2009, 06:31 AM

I cable into the 8ohm. As the AVT is solid state power output, you don't need to worry about matching the ohms exactly, but only use the single mono input on the cab

rockinr0ll · 07-25-2009, 12:39 PM

I have a 1936 - AVT50x and I use the mono input.

07-25-2009, 06:06 AM	#1 (permalink)
eshy Junior Member Join Date: Jun 2009 Posts: 5	1936 avt150h question Hi i have the above set up now and was wonderinghow to cable these up ? Should I run a single feed from head to cab into the 8 ohm input, or should I run 2 feeds from the head into the 16 ohm inputs?

07-25-2009, 06:31 AM	#2 (permalink)
poeman33 Senior Member Join Date: May 2008 Location: Ontario, Canada Posts: 471	Re: 1936 avt150h question I cable into the 8ohm. As the AVT is solid state power output, you don't need to worry about matching the ohms exactly, but only use the single mono input on the cab __________________ --------------- Marshall JCM2000 DSL50 Avatar Vintage 4x12 cab Fender American Deluxe HSS Strat Ash body

07-25-2009, 12:39 PM	#3 (permalink)
rockinr0ll Senior Member Join Date: Feb 2009 Posts: 1,602	Re: 1936 avt150h question I have a 1936 - AVT50x and I use the mono input.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Today
Marshall Amps	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Marshall Amp Forum