jcm 800 bass cabinets

brock · 11-09-2009, 06:59 PM

can any one tell all the types of cabinets they made for the jcm 800 bass series?

brock

American Viking · 11-09-2009, 10:00 PM

2x15's in a 4x12 enclosure. They've also had 4x12 bass cabinets but I don't know that they were in the 800 line.

Ken · 11-10-2009, 07:43 AM

Quote:

Originally Posted by brock

can any one tell all the types of cabinets they made for the jcm 800 bass series?

brock

The 1982 4x12 models with G12H80's had the 444 bass cones, so in theory it was a bass cabinet.

Ken

brock · 11-10-2009, 05:36 PM

ok thanks just trying to see what i could get to match the jcm 800 4x10 bass cabinet that i have.

SaltetOhlsson · 11-20-2009, 04:14 PM

Quote:

Originally Posted by brock

can any one tell all the types of cabinets they made for the jcm 800 bass series?

brock

Yea, I would also like to find a link to the full line up of JCM 800 Bass Series 1932B, 1935B and what kind of Celestions they contained. Anyone???

T-Bird · 11-21-2009, 10:19 AM

Hi.

Don't remember the model numbers, but the ones I had in the 80's had stamped basket G12H-100's in the 4*12" angled cabinet, and cast basket 15's in the 2*15".

Mind You that the 2*15 I had was a good 10cm IIRC or so deeper than the "standard" cabs, so unless a second set of tubs are installed or the front casters are screwed out a bit, the cabs won't stay on top of eachother.

Regards
Sam

11-09-2009, 06:59 PM	#1 (permalink)
brock Junior Member Join Date: Nov 2009 Posts: 7	jcm 800 bass cabinets can any one tell all the types of cabinets they made for the jcm 800 bass series? brock

11-09-2009, 10:00 PM	#2 (permalink)
American Viking Senior Member Join Date: Jan 2009 Location: RICHMOND, VIRGINIA Posts: 2,025	Re: jcm 800 bass cabinets 2x15's in a 4x12 enclosure. They've also had 4x12 bass cabinets but I don't know that they were in the 800 line. __________________ Transformers inside amplifiers were not originally designed to be in there, and the tube was not created for the guitar amp. ANY recommended idle current is a guideline and in no way a necessary requirement. There is no skeleton key for any tube amp.

11-10-2009, 05:36 PM	#4 (permalink)
brock Junior Member Join Date: Nov 2009 Posts: 7	Re: jcm 800 bass cabinets ok thanks just trying to see what i could get to match the jcm 800 4x10 bass cabinet that i have.

11-21-2009, 10:19 AM	#6 (permalink)
T-Bird Senior Member Join Date: Jul 2009 Location: Finland (Northern Europe) Posts: 213	Re: jcm 800 bass cabinets Hi. Don't remember the model numbers, but the ones I had in the 80's had stamped basket G12H-100's in the 412" angled cabinet, and cast basket 15's in the 215". Mind You that the 2*15 I had was a good 10cm IIRC or so deeper than the "standard" cabs, so unless a second set of tubs are installed or the front casters are screwed out a bit, the cabs won't stay on top of eachother. Regards Sam

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Today
Marshall Amps	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Marshall Amp Forum