2 amp heads into a stereo 4 -12 cab.

ccwhiskey · 08-12-2009, 06:09 PM

hi , i want to try running my 2 jcm 800 heads into a stereo cab to blend the amp sounds ,what is the proper way to do this. my amps are a zakk wylde signature and kerry king signature and the cab i want to try this with is a zakk wylde slant 4-12 . i have a idea how ,but want some feed back to be sure... thanks

American Viking · 08-12-2009, 06:17 PM

Set both amps to 8ohms, make sure the switch on the cab is set to Stereo and plug each amp into each side. That's all there is too it. Rock it brother.

By the way, it is a MONO/STEREO cab right? Should have the back panel like this

If it's just like that, 4 ohms on the left in Mono, 16ohms on the right in Mono, 8ohms on both sides in Stereo, than that is correct.

ccwhiskey · 08-12-2009, 06:36 PM

thanks!!! thats what i thought.... i cant wait to hear it!!!

jam · 08-18-2009, 11:52 AM

those are two awesome amps that should work good

08-12-2009, 06:09 PM	#1 (permalink)
ccwhiskey Junior Member Join Date: Aug 2009 Posts: 7	2 amp heads into a stereo 4 -12 cab. hi , i want to try running my 2 jcm 800 heads into a stereo cab to blend the amp sounds ,what is the proper way to do this. my amps are a zakk wylde signature and kerry king signature and the cab i want to try this with is a zakk wylde slant 4-12 . i have a idea how ,but want some feed back to be sure... thanks

08-12-2009, 06:17 PM	#2 (permalink)
American Viking Senior Member Join Date: Jan 2009 Location: RICHMOND, VIRGINIA Posts: 2,030	Re: 2 amp heads into a stereo 4 -12 cab. Set both amps to 8ohms, make sure the switch on the cab is set to Stereo and plug each amp into each side. That's all there is too it. Rock it brother. By the way, it is a MONO/STEREO cab right? Should have the back panel like this If it's just like that, 4 ohms on the left in Mono, 16ohms on the right in Mono, 8ohms on both sides in Stereo, than that is correct. __________________ Transformers inside amplifiers were not originally designed to be in there, and the tube was not created for the guitar amp. ANY recommended idle current is a guideline and in no way a necessary requirement. There is no skeleton key for any tube amp.

08-12-2009, 06:36 PM	#3 (permalink)
ccwhiskey Junior Member Join Date: Aug 2009 Posts: 7	Re: 2 amp heads into a stereo 4 -12 cab. thanks!!! thats what i thought.... i cant wait to hear it!!!

08-18-2009, 11:52 AM	#4 (permalink)
jam Junior Member Join Date: Aug 2009 Posts: 8	Re: 2 amp heads into a stereo 4 -12 cab. those are two awesome amps that should work good Last edited by jam; 08-18-2009 at 07:16 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Today
Marshall Amps	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Marshall Amp Forum