weels / casters

Bobby Damit · 10-25-2008, 03:04 PM

Hi, I have a "vintage 1960" stero cabinet that I have had for over 10 years.
When I bought it I never had the weels. I am trying to find a set. The sockets take a screw in type weel. about 1/4''. I was looking on Ebay and saw a few sets that looked like they would work but they were around $200. wow. way too much.
Does anyone know where I can get a set for much,,, much... cheaper?
Will any other generic caster work. I cant find any at Home Depo.
Thanks for the help. storrow@bellsouth.net

steelhorse · 10-25-2008, 07:49 PM

I found a distributor that was much cheaper and even offered to pay return shipping if they didn't work.

I'm at the office right now and will try to look this up for you later and post a link to them. I THINK THEY WERE LESS THAN 50.00 SHIPPED.

steelhorse · 10-25-2008, 07:54 PM

Get in touch with these guys:

Marshall Casters Wheels DSL TSL JVM Extension Cabinet - eBay (item 160293787587 end time Oct-26-08 16:24:31 PDT)

Bobby Damit · 10-27-2008, 09:39 AM

Steel Horse,
Thank you soo much for taking the time to point me in the right direction.
Rock On!
Bobby D.

steelhorse · 10-27-2008, 01:25 PM

Hope they work for ya! Check your PM too.

stone temple pinot · 10-27-2008, 10:05 PM

would these work?
caster & socket

steelhorse · 10-28-2008, 12:26 AM

Maybe but that's awfully spendy 21.00 + shipping for each caster x 4 and no return shipping like the other dealer on ebay and his set is less than 40.00 all in.

stone temple pinot · 10-28-2008, 08:17 PM

they also have the socket....and it sounds like you may not need that part?

steelhorse · 10-28-2008, 08:33 PM

Some cabs come with them so hopefully his does!

MonstersOfTheMidway · 11-03-2008, 04:10 PM

Hello. I have seen these at Home Depot. I remember seeing casters featuring the hard plastic wheels, the softer plastic wheels, and the ball-type wheel. They also have the three screw and four screw plate. I can't remember what section they were in, but you can ask around. You can also try Lowe's, ACE, and ofcourse the marshall online store

steelhorse · 11-03-2008, 04:16 PM

Yes but usually they have to be cut down which is not a big deal and the threads have to be correct, but the benefit of Home Depot is that if they have them they're probably cheaper.

The referral I posted also pays for return postage if they don't work and their prices are for a set of 4 whereas the stores online are per piece which amounts to much more if you need the set.

10-25-2008, 03:04 PM	#1 (permalink)
Bobby Damit Junior Member Join Date: Oct 2008 Location: Florida Posts: 9	weels / casters Hi, I have a "vintage 1960" stero cabinet that I have had for over 10 years. When I bought it I never had the weels. I am trying to find a set. The sockets take a screw in type weel. about 1/4''. I was looking on Ebay and saw a few sets that looked like they would work but they were around $200. wow. way too much. Does anyone know where I can get a set for much,,, much... cheaper? Will any other generic caster work. I cant find any at Home Depo. Thanks for the help. storrow@bellsouth.net

10-25-2008, 07:49 PM	#2 (permalink)
steelhorse Senior Member Join Date: May 2008 Posts: 3,888	Re: weels / casters I found a distributor that was much cheaper and even offered to pay return shipping if they didn't work. I'm at the office right now and will try to look this up for you later and post a link to them. I THINK THEY WERE LESS THAN 50.00 SHIPPED. __________________ www.ricojronline.com 760-956-6619 Garmopat Pedal Mods "I wouldn't mind hearing your head smash through a glass door. That would be cool..." luekmeyer

10-25-2008, 07:54 PM	#3 (permalink)
steelhorse Senior Member Join Date: May 2008 Posts: 3,888	Re: weels / casters Get in touch with these guys: Marshall Casters Wheels DSL TSL JVM Extension Cabinet - eBay (item 160293787587 end time Oct-26-08 16:24:31 PDT) __________________ www.ricojronline.com 760-956-6619 Garmopat Pedal Mods "I wouldn't mind hearing your head smash through a glass door. That would be cool..." luekmeyer

10-27-2008, 09:39 AM	#4 (permalink)
Bobby Damit Junior Member Join Date: Oct 2008 Location: Florida Posts: 9	Re: weels / casters Steel Horse, Thank you soo much for taking the time to point me in the right direction. Rock On! Bobby D.

10-27-2008, 01:25 PM	#5 (permalink)
steelhorse Senior Member Join Date: May 2008 Posts: 3,888	Re: weels / casters Hope they work for ya! Check your PM too. __________________ www.ricojronline.com 760-956-6619 Garmopat Pedal Mods "I wouldn't mind hearing your head smash through a glass door. That would be cool..." luekmeyer

10-27-2008, 10:05 PM	#6 (permalink)
stone temple pinot Member Join Date: Oct 2008 Location: Chicago Posts: 44	Re: weels / casters would these work? caster & socket

10-28-2008, 12:26 AM	#7 (permalink)
steelhorse Senior Member Join Date: May 2008 Posts: 3,888	Re: weels / casters Maybe but that's awfully spendy 21.00 + shipping for each caster x 4 and no return shipping like the other dealer on ebay and his set is less than 40.00 all in. __________________ www.ricojronline.com 760-956-6619 Garmopat Pedal Mods "I wouldn't mind hearing your head smash through a glass door. That would be cool..." luekmeyer

10-28-2008, 08:17 PM	#8 (permalink)
stone temple pinot Member Join Date: Oct 2008 Location: Chicago Posts: 44	Re: weels / casters they also have the socket....and it sounds like you may not need that part?

10-28-2008, 08:33 PM	#9 (permalink)
steelhorse Senior Member Join Date: May 2008 Posts: 3,888	Re: weels / casters Some cabs come with them so hopefully his does! __________________ www.ricojronline.com 760-956-6619 Garmopat Pedal Mods "I wouldn't mind hearing your head smash through a glass door. That would be cool..." luekmeyer

11-03-2008, 04:10 PM	#10 (permalink)
MonstersOfTheMidway Senior Member Join Date: May 2008 Location: a chair Posts: 288	Re: weels / casters Hello. I have seen these at Home Depot. I remember seeing casters featuring the hard plastic wheels, the softer plastic wheels, and the ball-type wheel. They also have the three screw and four screw plate. I can't remember what section they were in, but you can ask around. You can also try Lowe's, ACE, and ofcourse the marshall online store

11-03-2008, 04:16 PM	#11 (permalink)
steelhorse Senior Member Join Date: May 2008 Posts: 3,888	Re: weels / casters Yes but usually they have to be cut down which is not a big deal and the threads have to be correct, but the benefit of Home Depot is that if they have them they're probably cheaper. The referral I posted also pays for return postage if they don't work and their prices are for a set of 4 whereas the stores online are per piece which amounts to much more if you need the set. __________________ www.ricojronline.com 760-956-6619 Garmopat Pedal Mods "I wouldn't mind hearing your head smash through a glass door. That would be cool..." luekmeyer

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode