Marshall Amp Forum - View Single Post - DSL 100 to 1960A which output/input to use?

Brett Blackmore · 07-16-2008, 06:52 AM

Hi,

2 x 16 Ohm cabs mean you are going down to 8 Ohm in total - this means you select "mono" on the switch on both cabs, you leave the speaker cable in the 16 Ohm socket on the cab and plug the other ends in to the two sockets on the amp which are labeled 4 Ohm / 8 Ohm (not the 16 Ohm socket). Finally you then select 8 Ohm on the switch on the DSL which overrides the 4 Ohm socket to 8 Ohm. This means both sockets are set to 8 Ohm.

Cheers Brett

07-16-2008, 06:52 AM	#6 (permalink)
Brett Blackmore Senior Member Join Date: Apr 2008 Location: Bingen, Germany Posts: 461	Re: DSL 100 to 1960A which output/input to use? Hi, 2 x 16 Ohm cabs mean you are going down to 8 Ohm in total - this means you select "mono" on the switch on both cabs, you leave the speaker cable in the 16 Ohm socket on the cab and plug the other ends in to the two sockets on the amp which are labeled 4 Ohm / 8 Ohm (not the 16 Ohm socket). Finally you then select 8 Ohm on the switch on the DSL which overrides the 4 Ohm socket to 8 Ohm. This means both sockets are set to 8 Ohm. Cheers Brett