Marshall Amp Forum - View Single Post

nofearfactor · 11-03-2009, 07:07 PM

I have a schematic some where to the amp I could scan to him if he needs it. The amp is not mine. In my OP I stated it was a question from a post'r at TheGearPage who IM'd me knowing I own 9200s. I asked him to check the cables in to the power amp,cables out of the preamp,etcetc. He thinks it may be a problem with the preamp.

I had almost the same problem with an Alesis RA-100 power amp which is a stereo power amp and a totally different setup than the 9200. The relays contact points were in need of repairing causing it to do just about the same thing he descibes but only in one side of the amp.

Anyways. Thanx for the replies.

11-03-2009, 07:07 PM	#5 (permalink)
nofearfactor Senior Member Join Date: Mar 2009 Location: cold,dark... Posts: 227	Re: 9200 fades out,both sides... I have a schematic some where to the amp I could scan to him if he needs it. The amp is not mine. In my OP I stated it was a question from a post'r at TheGearPage who IM'd me knowing I own 9200s. I asked him to check the cables in to the power amp,cables out of the preamp,etcetc. He thinks it may be a problem with the preamp. I had almost the same problem with an Alesis RA-100 power amp which is a stereo power amp and a totally different setup than the 9200. The relays contact points were in need of repairing causing it to do just about the same thing he descibes but only in one side of the amp. Anyways. Thanx for the replies. __________________ myspace- http://www.myspace.com/nofearfactor some gear pics- http://community.webshots.com/album/...ecurity=QbSaeN