Sorry everybody, I am in and out of town all summer. I take my amp with me, and it has been great! It really blows away the stock amp by a mile (and I loved it even before I made the changes). I plan to add mid-shift to the clean channel next (already have parts), and add a 120V AC power outlet for accessories. I am also considering adding a master volume (attenuator), so that you can adjust both channels for balance between clean and dirty (turned up to the max) with the existing controls, then adjust the overall volume of both channels without messing up the balance between the channels. When I finally work everything out, you will all hear about it. I hope many people will be interested. Many of these mods will work in other amps. Here are some photos, as someone on this thread requested. The black knob above the CH2 mid control is the CH2 mid shift (I plan to replace the black knob with a Marshall knob, as soon as I have obtained one). The toggle switch above the channel switch on the front panel does the same job as the footswitch I added, and will not be a part of the final kit, as it is redundant, and makes everything harder to install. The knob on the back is the clean channel mid. I plan to locate the clean channel mid-shift knob next to the clean channel mid control on my amp. All of the controls can be mounted on the back panel, for those of you that prefer not to drill holes in the front (I prefer front panel access, and don't care about drilling holes in the front panel). Please offer me your suggestions and comments if you have any. Have your say as to how it should be done. Cheers, all!
PETER THE TONE DOCTOR
