Marshall Amp Forum - View Single Post

stryker59 · 07-09-2008, 10:28 AM

from your description you are doing it backwards.
you should turn the power switch on first and leave the standby switch on standby. let the tubes warm up for a few minutes and then flip the standby switch on. when turning the amp off, reverse this, standby first then power switch off.

07-09-2008, 10:28 AM	#2 (permalink)
stryker59 Senior Member Join Date: Jan 2008 Location: staunton, va Posts: 653	Re: Standby power switch from your description you are doing it backwards. you should turn the power switch on first and leave the standby switch on standby. let the tubes warm up for a few minutes and then flip the standby switch on. when turning the amp off, reverse this, standby first then power switch off. __________________ *you've been weighed, measured, and found wanting!*