Marshall Amp Forum - View Single Post - Marshall Valvestate AVT 20 Problem

RogerAF · 06-24-2008, 08:04 AM

Can't say for certain, but try checking the ground continuity in the cables between the reverb and the amp chassis--this assumes the reverb is in a separate box with an input and an output. Usually RCA type jacks/plugs are the connectors, sometimes the grounds can disconnect.

Hope this helps,
Roger

06-24-2008, 08:04 AM	#2 (permalink)
RogerAF Junior Member Join Date: Jun 2008 Posts: 7	Re: Marshall Valvestate AVT 20 Problem - help? Can't say for certain, but try checking the ground continuity in the cables between the reverb and the amp chassis--this assumes the reverb is in a separate box with an input and an output. Usually RCA type jacks/plugs are the connectors, sometimes the grounds can disconnect. Hope this helps, Roger