View Single Post
Old 09-15-2009, 08:41 PM   #98 (permalink)
solarburnDSL50
Senior Member
 
solarburnDSL50's Avatar
 
Join Date: Aug 2008
Location: Wetville
Posts: 2,166
Re: Power tubes?? Who, What, When Where how??

Quote:
Originally Posted by RiverRatt View Post
I've been living in red channel land for the last week or so. I've been trying out some Tungsram ECC83's I'm selling on eBay, making sure they aren't noisy and can handle the gain. They are a strange lot of tubes - Marty tested them way high, but in the DSL they aren't as high gain as my RCA/RFT combination. Not bad sounding, though. I think I developed a distaste for them when I was using them in my old Laney. The more I think about it, that amp was probably needing a cap job pretty bad - I kept blaming the thin, no-bottom-end tone on tubes.
Back to the EQ, I can get a decent JCM800 tone out of the red channel on Ultra Gain 1 with the gain at about 1 o'clock, but it's bright... that's the main reason for the weird settings. I may have a little presence dialed in - I don't really remember. If I'm on the green channel, it's more like 6-6-6. And yes, the bass boost is definitely working. I haven't been able to crank the amp for a few days, and it sounds better with the bass boost at low volume. If I wasn't stuck at the office, I could have had the house to myself for a couple of hours today. That's usually the way it works out.

Hey, I forgot to mention: I found a treasure the other day. My wife was going through some old clothes that we had put away in rubbermaid containers years ago (seems like we never throw anything away). She found a Marshall t-shirt that I had gotten at the NAMM show in 2000. It was autographed by Jim Marshall and had the "new" JTM45 RI on the front. That brings my total to 3. For some reason, I didn't even remember having that shirt.
Man I always forget I boost too. Usually I use lead 1 with the gain at 4/5 and add some boost with my Dano Transparent Overdrive. I get some added thickness and punch only the way I use it. I don't try to get more gain. I just leave my EQ basically the same for the crunch channel but take the bass boost off if going at it with volume there.

I wouldn't mind having a JTM45 RI 30 watter. Nice frigg'n amp! Cool on the shirt man.
__________________
Wilder modded DSL50
Martimus Maximus preamp stack- "NOS juiced"
6CA7EH's


Recommended:
FJA Mods
Wilder Amplification


Quote:
Originally Posted by Ken View Post
My mids are always on 10. But then, I'm playing "anti-scoop" metal. Ken
Quote:
Originally Posted by Wilder Amplification View Post
I'm sure you will agree with me on this...

It's called "Stop listening with you eyes".
solarburnDSL50 is online now   Reply With Quote