Quote:
Originally Posted by Adwex
Yes, there is a problem. 2 8x10 cabs, at 4 ohms each, will equal 2 ohms when you them both into the amp. I don't know of any amp that can run at 2 ohms.
You could wire the two cabs in series with each other, then they would combine to equal 8 ohms.
|
This is interesting because if you have Four (4) 16 ohm cabs you can actually run two Y cables (with the four ends in the cabs) into the two cabinet outputs with the selector set to 4 ohms. Sweet set up! I just need three more cabs and two Y cables...
