View Single Post
Old 07-01-2009, 08:37 PM   #13 (permalink)
Jesstaa
Senior Member
 
Jesstaa's Avatar
 
Join Date: Apr 2009
Location: Gippsland, Vic, Australia.
Posts: 801
Send a message via MSN to Jesstaa
Re: Marshall EL34 100/100 Dual Monobloc Amp

Quote:
Originally Posted by American Viking View Post
Of course in doing so you would be better off just A/B/Y'ing two preamps into the same side of the power amp. If you split the power amp you won't be able to use all four speakers within a cabinet at once. You'd have to stereo the cab to make it work. So essentially you're cutting your speaker cab in half if you can run stereo. If you can't run it stereo than you can't do it at all unless you have another cab or a quad stack! That'd be the way to go, get four 4x12's and make the singer carry them to keep his ego in check!
One problem, I do Vocals/Guitar D=

I'll just go out and find some poor sodd to be my roadie =D
And I like the idea of 4 cabs. And running it in stereo would be cool with me.
__________________
GEAR LIST
Marshall JCM900 4100 (6L6) (1995)
Marshall Valvestate 1965A cab (????)
Cort VX-2V (2008)

TUBES/SPEAKERS
Power: Groove Tube 6L6GCB
Phase Inverter: Sovtek 7025
Pre: V1 - N.O.S Mullard ECC83. V2 National 12AX7A
Speakers: Celestion G10L-35

Marshall forever
My tube amp & Real Music appreciation forum
Jesstaa is online now   Reply With Quote