Marshall Amp Forum - View Single Post

jcmjmp · 06-29-2009, 08:12 PM

The hot plate is probably not the problem when running the amp at "3" on the master volume unless it is faulty, which is very rare.

Have you tried the amp without the hotplate with the same settings?

06-29-2009, 08:12 PM	#7 (permalink)
jcmjmp Senior Member Join Date: Nov 2008 Posts: 1,341	Re: JCM 2000 blown by Hot Plate The hot plate is probably not the problem when running the amp at "3" on the master volume unless it is faulty, which is very rare. Have you tried the amp without the hotplate with the same settings?