steelfinger79

Hi.

I'we have a AVT 275 for 3 years and i'm very satisfied with it.

but, in the effect loop i use some components like dig effects..etc, so my problem is how to connect a usual midi foot controller to control the AVT 275 and the effect in once, because with the regular AVT 275 controller it is impossible to control the components by MIDI inputs, and it would be stupid to have two controllers, and otherwise I have to change the effects by hand or use all the time just one combination.

the connector for the Marshall is a flat comp one, so i bought a cable (adapter) with midi in-out on one side and this Marshall connector in the other side, rent a midi foot controller and connected it. The result was total failure, error in the Marshall channels, so i realize that the Marshall connector is probebly in some unicat sheme which doesn't match with the usual midi shemes.

My question is- is it posible ti connect it, it is not a problem for me to make that cable adapter by myself, but does any one know the sheme if it is posible to connect it that way!

I'm from Croatia, so please sorry about any spelling mistakes.